Connection of fishing line and single active fish float
The single active fish float is a fish float that can slide along the fish line. Mostly large and medium-sized fish floats with metal rings and spherical fish floats with through holes. This kind of fish float is suitable for long-range floating fishing or bottom fishing by sea pole. Its connection method with the fishing line is: put a small plastic ball with a diameter of 5-10 mm on the fishing line, and then pass the fishing line through the floating metal ring or the spherical hole of the floating fish float, and the lead pendant Connect with bait hook. According to the water depth required by float fishing and bottom fishing, use a nylon braid to tie a knot at the corresponding position in the fishing line. This knot should be larger than the inner diameter of the through hole of the plastic ball to serve as the cutoff for the fish float to slide along the fish line point. Its position can be adjusted by moving the wire knot. This connection can minimize the distance between the fish float and the lead sinker, which is very convenient for throwing. After the fishing group enters the water, the fish floats to the surface along the fishing line by its buoyancy.
Connection of fishing line and single active fish float
Use rubber tube connection method: first put the rubber tube into the fishing line, insert the fish float into the rubber tube, and the fish float is fixed on the fishing line. If you want to adjust the position of the fish float. Hold the line in one hand and hold the rubber tube with the other hand to move along the line along with the fish float. This method is convenient to adjust and float, but it is only suitable for the connection between the fish float with a connector at the tail and the fish line.
Connection of fishing line and single fixed fish float
Wire sleeve connection method
First use nylon braided wire about 20 cm long to form a double wire to form a wire sleeve. Pass the wire sleeve through the round hole or metal ring at the tail of the fish float, and then pull the two thread ends from the middle of the passed wire sleeve. Tie a knot close to the end of the thread. Then, use a fishing line to wrap a double looped knot at the position where the fish float is selected, and then put the knotted knot into the double looped knot, and tighten the fishing line to fix the fish float. This method is suitable for the connection of fish floats with large floats and a round hole or metal ring at the end.
Wire sleeve connection method
Connection of fishing line and line fish float (Qixing float)
Line fish float (seven-star float) is a fish float used by anglers, it is to pass the fish line through multiple feathers or plastic balls, but the connection between them is loose and easy to slide. To this end, you can sharpen a small bamboo stick or wooden stick, insert it tightly, and then cut off the middle part. Keep a distance of 4-6 cm between each float.
Connection of fishing line and line fish float (Qixing float)
